Safety & Security Film

Safety Window Film — Peace of Mind for Your Glass

Glass breaks. Whether it's an accident, a storm, or an attempted break-in, when glass shatters it creates serious danger. Safety window film holds the shards together — keeping your family safe from injury and making life considerably harder for anyone trying to force entry.

✓
Holds Glass Together
4×
Slows Break-ins
Clear
Virtually Invisible

How Safety Film Works

Safety film is a thick, optically clear polyester film applied to the interior surface of your glass. When the glass is struck, the film holds all the broken pieces in place — preventing dangerous shards from flying through the air or falling on people nearby.

Think of it like the laminated glass in a car windscreen — if it cracks, it holds together rather than shattering into sharp pieces. Safety film brings that same protection to your existing home or building windows at a fraction of the cost of replacing the glass.

It's virtually invisible once installed — your windows look exactly the same. There's no tint, no dark appearance, just an additional layer of protection that most people won't even know is there.

  • Homes with young children — prevents injury from accidental glass breakage
  • Shopfronts and retail — deters smash-and-grab theft
  • Schools and childcare centres — safety compliance and peace of mind
  • Glass balustrades and pool fencing — high consequence areas if glass breaks
  • Sliding doors and large glass panels — common impact points in homes
  • Rental properties — protects tenants and reduces liability
  • Ground floor windows in less secure areas
  • Any glazing near stairwells, hallways or areas with foot traffic
  • Glass that doesn't immediately shatter buys critical time
  • Forces intruders to make repeated, noisy attempts to gain entry
  • Noise and delay dramatically increases the chance of detection
  • Works alongside other security measures — alarms, cameras, locks
  • Particularly effective on sliding doors, which are a common entry point
  • Thicker films (security grade) provide even greater resistance

Safety film doesn't make glass unbreakable — it makes breaking it much harder and far less dangerous. It's one layer in a broader security strategy.

More Than Safety — It's Security Too

The same film that protects your family from broken glass also makes your property significantly harder to break into. An intruder expecting to smash a window and be inside in seconds faces a very different reality with safety film installed.

The film holds the broken glass together, meaning repeated, forceful strikes are needed to create an opening. That takes time, makes noise, and dramatically increases the risk of being seen or heard. In most cases, opportunistic burglars will simply move on to an easier target.

This is why safety film is popular not just in homes with children, but on shopfronts, rental properties and any building where security is a concern.

Safety Film Questions

Everything you need to know before deciding

What exactly is safety film?
Safety film is a thick, optically clear polyester film that bonds to the inside surface of your glass using a strong pressure-sensitive adhesive. When the glass is broken, the film holds all the pieces together — preventing dangerous shards from flying through the air. It's similar in concept to how a car windscreen holds together when cracked.
Does safety film prevent break-ins?
It doesn't make glass impossible to break through, but it significantly slows the process. Instead of a single strike creating an opening, an intruder needs repeated, forceful impacts — which takes time and makes a lot of noise. Most opportunistic burglars will give up and look for an easier target. It's one of the most effective passive deterrents available.
Is it different from tinted window film?
Yes. Safety film is typically completely clear — it provides no tint or heat rejection. Its sole purpose is to hold glass together. You can also get combination films that provide both safety performance and some solar control, but pure safety film is optically clear. Your windows will look identical after installation.
Can safety film be added to existing windows?
Yes, absolutely. Safety film is applied to your existing glass — there's no need to replace the glazing. This makes it a very cost-effective upgrade. It works on most glass types, including single and double glazing. We'll assess your windows before installation to confirm suitability.
What thickness should I get?
Safety film comes in different thicknesses — we'll select the right grade for your situation. For most homes, a mid-weight film provides excellent protection. For commercial premises or high-risk shopfronts, we'd use a heavier grade. Either way, the price is based on the size of the job — we charge the same rate regardless of which grade we fit. We'll recommend what's right and explain why.
Does it change the look of my windows?
Not at all. Clear safety film is virtually invisible once installed — you won't be able to tell it's there just by looking at the window. There's no tint, no reflection change and no visual difference. It's one of those upgrades that's most valuable precisely because it doesn't look like anything has changed.

Talk to us about safety film

Whether it's for a young family's home, a rental property or a commercial premises, we'll help you choose the right film and install it properly. Hawke's Bay locals, honest advice.